Select Airplane
Ctrl+O

Select Helicopter

Select Multirotor

Select Scenario
Ctrl+A

Create FPV Scenario

Generate a new scenario from a satellite image

Import Scenario

Imports a new scenario downloaded from the Internet or from a friend.

Export Scenario

Exports the scenario to a file that can be shared with friends.

Delete Scenario

Deletes the selected scenario files.

Pause
Pause

Pause simulation

Time Scale x2
Shift+T

Speed up the speed of simulation

Time Scale /2
Shift+R

Slow down the speed of simulation

Real Time Scale
Shift+Y

Real speed of simulation

Settings
Shift+S

Program settings (language, video, sound, units, etc.)

English

Set language to English

Exit
Alt+F4

Exit AeroSIM RC

Basic

Basic Training

Basic

Basic Training

VLOS Pilot

Comprehensive set of manoeuvres for VLOS Pilot

AESA Exam

These are the manoeuvres of the official exam for the Spanish Aviation Authority AESA to obtain the RPA Pilot License

AESA Exam + Wind

These are the manoeuvres of the official exam for the Spanish Aviation Authority AESA to obtain the RPA Pilot License

Basic

Basic Training

Game Mode

In Game Mode, score points by collecting stars, and passing through rings and posts until out of fuel.

Select Pilot

Select Pilot

Pilot Logbook

Pilot Logbook

Certificate

Certificate

VLOS
F1

VLOS (Visual Line of Sight).

Zoom in and out with the right mouse button.

Chase View
F2

Chase View.

The position can be adjusted with the right mouse button and the SHIFT key.

Onboard Camera
F3

Onboard Camera.

There are several onboard camera positions predefined. You can assign a channel to select the camera.

To look around, press the right mouse button and move the mouse in the desired direction, or configure your transmitter channels in menu Controls / TX Configuration.

Change the camera position by pressing the right mouse button + Keys SHIFT or CONTROL, while moving the mouse in the desired direction.

Press both mouse buttons to restore initial position. The position of the onboard camera can also be edited from the aircraft editor.

Free View
F4

In the Free Mode, the viewer can move to any position.

Press the right mouse button and the keys SHIFT or CONTROL to move the view point.

Press both mouse buttons to engage/disengage looking at the aircraft.

Secondary View
F7

Secondary View - Chase View
Shift+F3

Secondary View - Close Up
Shift+F1

Shows a large image of the aircraft as seen from the ground.

Secondary View - Onboard Camera
Shift+F4

Map
F6

Reset camera

Reset zoom and position

Show Viewer Controls
Shift+C

Enhanced Perception
F5

Displays a large graphic representation of the aircraft when the size of the Projection on the screen is too small to correctly recognise the attitude

Next Instrument Panel
F8

Cycles Instrument Panel views

Reset Instrument Positions

This option will move all instruments back to their default position.

The instruments can be moved by pressing CONTROL + mouse left button while dragging to the new position.

Vario

Vertical Velocity

Next OSD
F9

Cycles available OSDs

No OSD
Ctrl+F9

OSD Standard Text

OSD Standard Nav

OSD Plugin DJI

OSD Plugin Ikarus

OSD Plugin DMD

Aircraft Graphic Options

Aircraft Easy Tuning
Shift+U

Edit Aircraft
F12

Save Aircraft
Ctrl+S

Fuel/Battery Load

Fill Fuel Tank and Recharge Battery

Start/Stop Engine
5

Landing Gear
G

Flaps
F

Brakes
B

Throttle Hold
T

Function Throttle Hold will set the engine to Idle to practise Autorotation

LEDs
L

Lights on aircraft to help with orientation

Flight Mode 0
W

Flight Mode 1
E

Flight Mode 2
R

ALT Hold
H

Auto Pilot that holds the Altitude

Course Lock
N

In Course Lock mode, the direction of Pitch and Roll is not made by 'Front' definition, but by an absolute reference heading.

RTH
Ctrl+H

Return To Home

Parachute
Ctrl+T

Parachute for Flight Termination

Camera Stabiliser
Y

The FPV camera will hold position regardless of aircraft attitude

Gimbal Center

Center gimbal position

Unlimited Fuel/Battery

Unlimited Fuel/Battery. Fuel is not consumed nor battery is discharged, allowing unlimited flight time.

Empty Fuel Tank

Empty Fuel Tank. As fuel is consumed during flight, the position of the Centre of Mass will typically move to the rear of the aircraft, affecting the handling in flight. Enable this option to fly the aircraft in these conditions.

Aircraft predefined position 1
1

Aircraft predefined position 2
2

Aircraft predefined position 3
3

Hand Launch
Ctrl+Space

Altitude Increment 100 m
0

Reset Aircraft Position
Space

Second Chance
Backspace

Reset aircraft to a previous position before a crash

Turn Aircraft Upright
F11

Turn over the aircraft when crashed upside-down

Manual Reset Position

Auto Reset Position

Automatically resets the aircraft position after a crash

Auto Upright

Turn over the aircraft when crashed upside-down

Auto Second Chance

Reset aircraft to a previous position before a crash

Scenario Settings

Scenario Settings

Wind Settings
Shift+W

Calm Wind

Light Breeze

Moderate Breeze

Strong Wind

Cross wind

Thermals

Day

Day

Night

Night

Start Recording
Insert

Replay
Home

Take Photo
C

Take a photo of the screen and save it as jpg in folder C:/ProgramData/AeroSIM_RC/snapshot or C:/Users/Public/Documents/AeroSIM_RC/snapshot

Controllers

Define Keys

Show Help

Show controls

Close plugin

Help

USB & Licenses

About AeroSIM RC

Select Scenario
Ctrl+A

Select Multirotor

Select Airplane
Ctrl+O

Select Helicopter

Aircraft predefined position 1
1

Aircraft predefined position 2
2

Aircraft predefined position 3
3

Hand Launch
Ctrl+Space

Fuel/Battery Load

Fill Fuel Tank and Recharge Battery

Next Instrument Panel
F8

Cycles Instrument Panel views

Next OSD
F9

Cycles available OSDs

Enhanced Perception
F5

Displays a large graphic representation of the aircraft when the size of the Projection on the screen is too small to correctly recognise the attitude

Secondary View
F7

Map
F6

Wind Settings
Shift+W

Calm Wind

Light Breeze

Moderate Breeze

Strong Wind

Cross wind

VLOS
F1

VLOS (Visual Line of Sight).

Zoom in and out with the right mouse button.

Chase View
F2

Chase View.

The position can be adjusted with the right mouse button and the SHIFT key.

Onboard Camera
F3

Onboard Camera.

There are several onboard camera positions predefined. You can assign a channel to select the camera.

To look around, press the right mouse button and move the mouse in the desired direction, or configure your transmitter channels in menu Controls / TX Configuration.

Change the camera position by pressing the right mouse button + Keys SHIFT or CONTROL, while moving the mouse in the desired direction.

Press both mouse buttons to restore initial position. The position of the onboard camera can also be edited from the aircraft editor.

Free View
F4

In the Free Mode, the viewer can move to any position.

Press the right mouse button and the keys SHIFT or CONTROL to move the view point.

Press both mouse buttons to engage/disengage looking at the aircraft.