What's New in AeroSIM RC
Tell us what you would like to see next in AeroSIM RC
email: info@aerosimrc.com
New in 3.8
- Training Program for Helicopter and Multirotor
- New Model: OktoXL with stabilized camera
- New Side Menu with main options: Select Model, Training, FPV and Game mode
- CareFree v2.0 with "teachable" option at Receiver Part
- Warning graphics driver not installed when very low FPS
- Output path can be changed by editing the registry
- Scenario generator: Terrain elevation 3D view fixed for high altitudes
- Plugin: New Crash Inhibit option
- Plugin: HAT also computed even when Model is positioned underground
- Fixed users stats are saved when changing user
- Workaround for bug in Win7 with dialogs not showing in full screen app
New in 3.7
- New Mikrokopter models: MK-Quadro, MK-Hexa, MK-Okto and MK-Okto2
- New functions for MikroKopter models: Alt-Hold, Camera Stabilisation, CareFree mode, Motors On/Off
- New camera Roll stabilisation
- Lesson Roller Coaster is now easier
- Windsock moved out of the runway in generated scenarios
- New initial position for helicopters and multirotors, with tail view and nose away from pilot
.WHATS_NEW_ES "- Nuevos modelos de MikroKopter: MK-Quadro, MK-Hexa, MK-Okto y MK-Okto2\n- Nuevas funciones MikroKopter: Alt-Hold, estabilización de Camera, modo CareFree, Motores On/Off\n- Nueva estabilización lateral de cámara\n- Lección Montaña Rusa es ahora más fácil\n- Corregida la posición de la Manga de viento en escenarios generados\n- Nueva posición inicial para helicópteros y multirotores, con vista desde la cola y morro hacia delante"
New in 3.6
- New Helicopter Model
- New Radio Flight Modes (Idle Up and Throttle Hold modes for helicopters)
- Improved engine smoke graphics
- Instrument RPM, now shows Rotor RPM in helicopters
- Improved Wind model
- New electronic beep sounds at model power-on (330X-S)
.WHATS_NEW_ES "- Nuevo modelo de helicóptero\n- Nuevos Modos de Vuelo (Idle Up y Throttle Hold)\n- Mejorado el efecto humo de motor\n- Los instrumentos muestran RPM del rotor en helicópteros\n- Mejorada simulación del viento\n- Nuevo sonido al conectar batería (330X-s)\n"
New in 3.5
- New model 330X-S (quadcopter by GAUI)
- Real terrain elevation data for scenarios created from satellite image.
- New Plugin capability to try new OSDs and automatic pilot products.
- Instrument Panel units now configurable.
- Training Program: Landings now easier to pass.
- Fixed REV in channel configuration screen for modes 1,3 y 4.
New in 3.4
- New functions from Transmitter
- Hand Launch from Transmitter
- Model position reset
- Alt Autopilot (CyberQuad only)
- FPV Camera Tilt stablilisation (CyberQuad only)
- Training Program
- Option to unlock all lessons
- Lesson progress timer now works fine in slow computers
- Wind turbulence adjusted in Landing Lessons
- Fixed model in water does not sound as crash
- JetEngine now stops in water
- Model in water now sinks naturally
- Direct access menu to Instrument Panel and OSD
- Instrument Panel now in correct position
- Instrument Panel position editable and stored for each screen resolution
- Fuel or Battery icon displayed according to model power system
- Editor shows the Mass of the selected part
- Improved User Interface
- Camera Controls
- Mouse wheel controls zoom
- Zoom Control added to Camera Zoom Land
- Warn when same key assigned to several functions
- Top Menu Bar improved (reduces mouse clicks)
- Top Menu Bar hides intelligently
- Control Pages Scroll with MouseWheel
- Hide mouse cursor while showing dynamic help
- Improved lesson buttons
- Improved graphics for controls with focus
- Nice Shadow at help boxes and menus
- Nicer loading screen
- Windows hides instantly at application exit
New in 3.3
- New aircraft model: Predator UAV aircraft
- New quadcopter model: CyberQuad
- R & D using AeroSIM RC (for developers of autopilots, stabilizers, IMUs, etc.)
- Improved graphics for NVidia cards
- New function: Altitude Hold for CyberQuad
- New function: FPV Camera Tilt stabilization for CyberQuad
- CloseUp window with FPV camera
- CloseUp window now resizeable
- New square quadrotor mix
- Added ground effect and reflow effect to propellers
- New Edit Model page layout
New in 3.2
- Improved model landing performance
- Improved channel configuration menu
- Support for Transmitter Modes 1,2,3 and 4
- Offer channel configuration menu after install
- Added tips on Transmitter configuration for simulator
- Improved Brakes warning only when on ground
- Improved Context help on Instrument Controls
- Lessons: Offer to try Training Program if not tried yet
- Lessons: Fixed wind direction in low-pass over runway lessons
- Lessons: Increased time in Taxi lessons
New in 3.1
- BRAND NEW Scenario Generator
- Accepts jpg images of any size
- Interactive Elevation Map editing. See the terrain elevation while editing.
- Graphically select the Model Initial Position.
- Georeference the image with any two points of known coordinates.
- New nicer character fonts.
- Removed "Adverse Wind" caption.
- Predefined Mild Wind changed from 10 to 5 km/h, gust changed from 10% to 5%.
- Wind gust selectable in 1% increments (was 10%).
- Added feedback in controls configuration.
- Fixed wind heading bug.
- Fixed OSD heading bug.
- Fixed crash counter bug.
- Fixed sun position in Scenario Generator.
New in 3.0
- New full Training Program for the beginner to learn to control a RC model.
- with 63 lessons including Control operation, Take Off, Landing, Taxi, Forced Landings, and flight Patterns.
- New Automatic Updates notifies if there is any update available and downloads it.
- New User Profile to track training progress and flight statistics.
- New Model Out-of-Trim function on aileron, elevator and rudder.
- New Engine Failure warning.
- Improved Ground effect.
- Improved Wind controls.
New in 2.03
- Improved Model Selection by showing model features graphically and model info such as weight, wingspan, scale and recommended pilot experience.
- Improved EF2000 model performance.
- Added Model CG tuning slider to Tune Model Window to easily move forward/aft the CG of the model.
- Improved battery model behaviour realistically simulates discharge curves for LiPo, NiCd and NiMh.
- New BEC functionality in Speed Control component.
- FPV Camera parameters moved from FPV-Options to a new model component FPV. New FPV model component with up to 3 FPV camera configurations and pan/tilt servo speed.
- FPV Camera can now be controlled with channels 1,2,3 and 4.
- Added to OSD: Battery voltage, current, consumed charge and Timer (time elapsed since last battery/fuel recharge)
- Lat/Long display in OSD is now optional.
- Units display in OSD is now optional.
- New Altitude, Range and Timer alarms in OSD.
- New access to Controller / TX-Configuration, from Menu Bar, for Flaps, Landing Gear, Brakes and FPV Pan/Tilt channel configuration.
- Improved TX-Configuration menu with images for Flaps, Landing Gear, Brakes and FPV Pan/Tilt.
- Added Range and Bearing to Home to the Compass instrument in Instrument Panel.
- Engine start/stop and brakes operation are now recorded and played back.
New in 2.02
- New Quadcopter model
- New AutoPilot Component (senses accelerations X,Y,Z and roll and pitch angles)
- Replay flight: Motor is now smooth
New in 2.01
- Demo is now limited to 2 minutes net flying
- Scenario Generator
- Texts reworded
- Target Scenario File Size is now in MB (was KB)
- When Scenario Generator launches AeroSIM RC, the brand new scenario will be loaded
- Fix: Model in generated scenario now positioned correctly on ground
- Fully supported English Language
- Default language now taken from operating system user preferences
- Message "Restart program after language change" in the newly selected language
- User Manual in English
- Scenario Generator in English
- Installer in English
New in 2.0
- New Models: Cessna 182 SkyLane, Dolphin, Extra 330S, FlyingWing, Nimbus 4M, P-51D, Vibrant.
- Jet Engine (for model EF2000)
- Retractable Landing Gear (for models EF2000 and P-51D)
- Brakes (for model EF2000)
- FPV features (First Person View)
- FPV camera controlled from transmitter
- OSD with data from GPS
- WayPoints editor
- Scenario Generation Tool from aerial photo