On Screen Display for FPV

The FPV Mode of the Instrument Panel (OSD) can be selected by pressing at the Function Bar, or from Main Menu / View, or pressing the corresponding Key

There are two OSD modes: Basic and Navigation, which can be customised.

OSD Basic Mode

In this mode, the following data is presented:

 

Heading (280º)
The circle shows the direction to the selected waypoint

  
 
Altitude (273m)
Ground Speed
(36km/h)
Vertical Velocity
(5km/h in this case)
 
Vertical Velocity arrow
 

Battery Voltage (11.6V)
Current (4.9A)
Consumed Charge (0.08Ah)

Latitude - Longitude

Flight Timer (3:04)

 

Selected WayPoint (HOME), heading to WP (19º), distance to WP (194m) and estimated time to WP (0:19)
The next WP is selected by left mouse button click over the name of the WP (e.g. over 'HOME')

OSD Navigation Mode

OSD Navigation Mode

The OSD Navigation Mode shows the position of the flying site, and the defined waypoints (A, B and C)

Triangle Shows the heading and position of model
Circumferences

Show the distance to the flying Site. Numbers 1, 2 and 3 represent distance in kilometres or the unit selected. The scale is automatically adjusted to keep the triangle inside the circumferences.
A, B, C, D Represent the position of the active Waypoints. The pink colour means that 'C' is currently the selected waypoint.

Alarms

The OSD alarms will flash the altitude, range and flight time indications on the OSD when values are exceeded. The alarms can be configured from FPV Options panel described below.

Customise OSD

The OSD can be customised. From Main Menu / Camera FPV Options, at the OSD tab, you can:

OSD options