Initial Position 1
Take-off from left to right
Take-off from right to left.
Initial Position 3
Camera is in the middle of the runway behind the model
Model Initial Position
Each scenario has a predefined set of initial model and camera positions P1, P2, and P3
|
|
|
|||
|
Initial Position 1 |
|
Initial Position 2 Take-off from right to left. |
|
Initial Position 3 |
Predefined Initial Positions of model and camera
| How to reset Model Position | |
| Automatically | After a crash. This can be disabled from Main Menu / Model / Automatic Reset Position |
| From Keyboard | Push Space Bar |
| From a Transmitter Switch | Assigning a transmitter channel to this function from Main Menu / Controller / Configuration |
From the Function Bar |
Pushing |
| From Main Menu / Model | Reset Model Position |
Turn Model Upright in the same place
If the model is upside down after a crash, it can be turned upright from Main Menu / Model / Turn Model Upright