On-Board Camera (FPV)

This camera mode is selected pushing in the Function Bar, or from the Main Menu / Camera, or pressing the corresponding Key.

This camera is installed on-board the model. The camera can be placed anywhere relative to the model.

This camera mode equivalent to FPV (First Person View). The camera can be controlled using transmitter channels.

On-Board Camera From the Cockpit	On-Board Camera Under the Wing	On-Board Camera Under the Model

Controls

On Screen Controls Reset Move FPV Camera FPV camera positions 1, 2 and 3

Mouse controls Move the FPV camera Look around: Right mouse button + move mouse. Can also be controlled using the Transmitter, after selection of the channels. If you have a Head Tracker connected to the transmitter, the simulated camera can be controlled with the Head Tracker (this will probably require to adapt the Radio, Head Tracker and USB connectors) Look straight: Just release the right mouse button. Change Camera Position with respect to the Model: Move Camera - Left / Right / Up / Down: Right mouse button + CONTROL key + move mouse. Move Camera - Forward / Backward: Right mouse button + CAPS key + move mouse.

Change FPV Camera Position

The position of the on-board camera can be edited, and save as a new model, from the Model Editor, by editing the FPV Component you can:

• Specify the angles for pan and tilt.
• Set the central position angles (offset)
• Set the field of view of the camera
• Ser the pan and tilt servo speed (time in seconds to travel 60º)